|
11-02-2018, 05:20 AM
|
#1
|
Senior Member
Join Date: Sep 2016
Posts: 141
|
2019 3901 wb
Picking our 2019 3901 wb next Thursday...question is ...the auto level control is behind the doors where the water connection and filter and dump valves are...how do you run the system as when you are hooking up to your vehicle as you cannot run system and see hitch in truck... is it also controlled through the incommand system or it takes 2 people one spotter and one controller...I hate the way they change stuff up if it works leave it alone..
|
|
|
11-02-2018, 12:09 PM
|
#2
|
Junior Member
Join Date: May 2018
Posts: 25
|
You can run the front jacks with the In Command system. So it can be done by yourself.
__________________
2018 F350
2018 Redwood 3901WB
|
|
|
11-02-2018, 05:55 PM
|
#3
|
Senior Member
Join Date: Sep 2016
Posts: 141
|
Thank you very much. Was hoping it could be done that way...
|
|
|
11-04-2018, 03:16 AM
|
#4
|
Junior Member
Join Date: Jun 2018
Posts: 22
|
Just took delivery of 2019 3091wb a couple weeks back and have not found the location to be an issue but thought it was in a bad location. Not tried the iN·command for this. Only used the RV for a few days, just ran out of warm weather in MI.
Do have an issue with the kitchen slide damaging the floor registers; their fix was slide slickers but I’m not sold on this. Let me know how yours is dealt with.
|
|
|
11-04-2018, 04:33 AM
|
#5
|
Senior Member
Join Date: Sep 2016
Posts: 141
|
Will do ...looks like the only permanent fix would be to router them out and have them counter sunk...Get ours Thursday...
|
|
|
11-04-2018, 04:36 AM
|
#6
|
Senior Member
Join Date: Sep 2016
Posts: 141
|
anyone of the 3 in particular.... after looking at them again looks like the furthest one next to couch would be the problem child...
|
|
|
11-04-2018, 04:46 PM
|
#7
|
Junior Member
Join Date: Jun 2018
Posts: 22
|
Dealer had damaged all three when they identified the problem to Redwood. I agree this could have been avoided by routering to lower, just not see it can be done now with linoleum in place. Dealer tells me the linoleum must float for expansion and contraction.
|
|
|
11-06-2018, 01:34 AM
|
#8
|
Senior Member
Join Date: Sep 2016
Posts: 141
|
the floor registers are screwed down it cant float right there...will update when we get ours Thursday....will have dealer operate them there several times..
|
|
|
11-06-2018, 01:44 AM
|
#9
|
Junior Member
Join Date: Jun 2018
Posts: 22
|
My registers are and we’re screwed down when the dealer damaged them, upon realizing what they had done they contacted Crossroads for a fix; they sent new registers and three of the slide slickers. Could be some bottom seals are tighter to the floor than others I suppose.
|
|
|
11-06-2018, 02:29 AM
|
#10
|
Senior Member
Join Date: Sep 2016
Posts: 141
|
Prolly not connected to damage but I notice all the dealers we have visited have slides out even though the unit is not fully leveled...will have to wait and see Thursday...
|
|
|
11-06-2018, 05:14 AM
|
#11
|
Senior Member
Join Date: Sep 2012
Posts: 3,353
|
Quote:
Originally Posted by katy4man
Prolly not connected to damage but I notice all the dealers we have visited have slides out even though the unit is not fully leveled...will have to wait and see Thursday...
|
Personally I don't think the slides are as delicate as some dealers would try to scare you about! We have, with our RW & other rvs, always extended the slides while stopping at rest areas for lunch without leveling & so far in 10 years of fulltiming have had NO slide issues.
__________________
Danny & Linda
Full-timed 10+ years
Former '13 FB owner
Traded '13 GMC Denali DRW D/A
Currently rv & truckless
Replacement undetermined
|
|
|
11-06-2018, 04:24 PM
|
#12
|
Senior Member
Join Date: Jan 2012
Posts: 2,811
|
Here's some food for thought:
When you level your unit, the old way with blocks under the tires and jacks for and aft or by using the Level-up system. You're putting pressure on the frame, should be equal, but who knows for sure.
But if you're just in a Rest Area sitting on just the wheels and king pin, not to much extra pressure on the frame.
So which is better for moving the slides??
Now the disclaimer would be if you were on a side hill with an excess lean to one side, then it might cause an issue.
__________________
Michelle & Ann
2018 Chevy 3500HD Crew Cab High Country DRW, D/A, 2016 RW39MB, Dual ACs, Auto Level, Auto Sat Dish, Stack W/D, King Sleep #, 17.5" Sailuns w/Disc, MORryde IS & Pin, Comfort Ride Hitch, 5.5 Onan, Res Fridge & Induction Cook Top
|
|
|
11-07-2018, 12:34 AM
|
#13
|
Senior Member
Join Date: Sep 2016
Posts: 141
|
Just pitching out thoughts on this apparent problem we don't have yet but prolly will after Thursday...just hope not...may regret trading 2018 38rl before this is done...
|
|
|
11-09-2018, 03:30 AM
|
#14
|
Senior Member
Join Date: Sep 2016
Posts: 141
|
Does yours have the power cord on a reel....ours does but only has retract switch position have to pull out cord manually....spent 4 hours at dealer to day going over everything..the tech was great....they had it hooked up and on line everything worked ran slide in and out 5 cycles floor vents were not an issue...power cord reel kinda surprised me but no biggy...also had big direct tv sat installed on roof it even worked...so far so good...guess only dislike is lights that are controlled by incommand system....prefer old way with switches....
|
|
|
11-10-2018, 05:48 PM
|
#15
|
Junior Member
Join Date: Mar 2018
Posts: 5
|
Our 2018 34RL has the same power reel for the shore power line with a two way toggle switch. Press up the line powers in and down the reel reverses and out it goes. Maybe the switch on your unit is not functioning correctly.
__________________
Steve Blomquist
|
|
|
11-10-2018, 09:23 PM
|
#16
|
Senior Member
Join Date: Jul 2015
Posts: 2,313
|
on my "16", I only have a one way switch.. I manually pull out the cable, and use the motor to pull it back in.
__________________
2020 F-350
2020 3991RD with-
17.5 Goodyear 114's , Titan Disc brakes, MorRyde 8K IS, Onan 6.5..
|
|
|
11-11-2018, 03:32 PM
|
#17
|
Senior Member
Join Date: Sep 2016
Posts: 141
|
That what this one is now manual pullout electric rollup.. our 18 3821rl had 2 position switch extend and retract...it is what it is...over all happy happy with 3901 wb
|
|
|
11-11-2018, 05:51 PM
|
#18
|
Senior Member
Join Date: Feb 2013
Posts: 7,101
|
Seems like a power out switch could make a "reel" mess, pardon the pun
__________________
Brad & Dory - Lone Tree, CO
CURRENT - 2013 Itasca Meridian 42E/2013 Wrangler 4dr Sahara
SOLD - 2014 Redwood 36RL/2014 F350 DRW
|
|
|
11-12-2018, 03:34 PM
|
#19
|
Senior Member
Join Date: Sep 2016
Posts: 141
|
It did sometimes...called it a powered backlash.....I'm good with the pullout though..
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|