Quote:
|
Originally Posted by DonMac
Dave..we had same problem but no slide in slide. When they built our unit the ribed gray hose that is the drain hose for the washer was installed in such a way the slide pulled the hose off its connection. Quite a few people have had this problem. My fix was to take the bed apart and remove the wood that was catching the rib on the hose and pulling it off when slide came in. Very bad workmanship. All is well now after fix. Now repairing ALL of the ceiling trim that has come loose and falling off. Also ceiling connection above dining table has come apart at the joint. Will be reglueing panel to strut today. Cindy sending tape to cover joint connection. Hope not to many things fall off you rig on your trip out west. I have heard that the repair facility where you have gone at Crossroads is closing down. Know anything about this?
|
I had posted om another thread that they are merging the Redwood and Cross Roads repair facilities. Repairs will still be available.
Linear Mode
