I think you can go to Lci website and find instructions for adjusting their hydraulic slide systems. I have done my kitchen slide with help from my son by be careful and adjust in small increments because whatever adjustment you make affect the inside and the outside. We used a floor Jack with a 2x4 support to take the weight off the brackets and rams to make the adjustment. Only do horizontal or vertical adjustment at one time, not both. I also found out that my brackets were bent and only had 1 volt holding the bracket onto the ram. They now make a longer bracket that take a 2 bolts which I ordered and replaced on that slide.
Rick and Mindy
2013 Redwood 31SL, 2011 Ford F350 SRW, 6.7, Crew Cab with Firestone Bags, Titan Disc Brakes