Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 04-05-2015, 08:03 PM   #1
Junior Member
 
Join Date: Apr 2015
Posts: 1
Thumbs down Slider motor replaced

Hello. We have been full-timing in our 36 RL for 2 years. We arrived in Myrtle Beach yesterday, and the bedroom slider no longer moves in or out! After investigation, we realized that one motor is working and one is not! We need to get that motor out for repair or replacement. However, since the slider is in and no longer will come out, we can not get to the screw that will release the motor.

Question is "does anyone know how to manually move the slide out"?
Neil&Nancy is offline   Reply With Quote
Old 04-05-2015, 09:26 PM   #2
Site Team
 
Dave&Ginny's Avatar
 
Join Date: Jan 2012
Posts: 5,407
Which motor?
__________________
SOB "The RV Wiseguy"
Dave&Ginny is offline   Reply With Quote
Old 04-05-2015, 09:58 PM   #3
Site Team
 
hoosierguy's Avatar
 
Join Date: Nov 2011
Posts: 1,340
Quote:
Originally Posted by Neil&Nancy View Post
Hello. We have been full-timing in our 36 RL for 2 years. We arrived in Myrtle Beach yesterday, and the bedroom slider no longer moves in or out! After investigation, we realized that one motor is working and one is not! We need to get that motor out for repair or replacement. However, since the slider is in and no longer will come out, we can not get to the screw that will release the motor.

Question is "does anyone know how to manually move the slide out"?

I think the Schwintek motors require 12 VDC to hold the slide in place. You might be able to move the slide in/out by disconnecting the positive (Red) cable at the battery. Then two people (one on each end of the slide) could pull it out or push it in. That is what I would try. Just be sure to re-connect the battery cable after you move the slide.
__________________
Guy & Phyllis
2012 RW36RL,DualA/C,KodiakDiskBrakes,TrailAir Tri-Glide,GY_G614's,Roadmaster Comfort Ride Slipper Spring Suspension
2011Dodge3500Laramie,CrewCab,4x4,SRW,Michelins, LongBed,6.7LCTD,3.73,PullRiteSuper5th20.5KHitch, BlueOxBedsaver

hoosierguy is offline   Reply With Quote
Old 04-05-2015, 11:38 PM   #4
Senior Member
 
Rick and Mindy's Avatar
 
Join Date: Feb 2013
Posts: 1,444
Quote:
Originally Posted by Neil&Nancy View Post
Hello. We have been full-timing in our 36 RL for 2 years. We arrived in Myrtle Beach yesterday, and the bedroom slider no longer moves in or out! After investigation, we realized that one motor is working and one is not! We need to get that motor out for repair or replacement. However, since the slider is in and no longer will come out, we can not get to the screw that will release the motor.

Question is "does anyone know how to manually move the slide out"?
According to the Lippert InWall Slideout owners manual:

In the event that the InWall slide unit fails to operate and manual operation is necessary, proceed as follows:
1. Locate the control panel
2. Unplug both motors.
3. The room may now be pushed in or out as desired. Larger rooms may take several people to push. Try to keep both sides of the room even. When the room is completely in, plug both motors back in to the controller,this applies a brake to the motors and keeps the room in the locked position. WARNING: DO NOT MOVE RV UNLESS MOTORS ARE PLUGGED IN!!

Hope this helps.

There are also error codes that will be set in the controller which will indicate which motor and where the problem exists. Once an error code is set the control board needs to be re-set. Energizing the extend/retract switch resets the board, then simply press the extend/retract switch again to operate.

One other thing. If no one has told you, whenever extending or retracting always keep the switch depressed for 3-5 seconds after the motors stop. This keeps everything set properly.
__________________
Rick and Mindy
Retired
2013 Redwood 31SL, 2011 Ford F350 SRW, 6.7, Crew Cab with Firestone Bags, Titan Disc Brakes
Rick and Mindy is offline   Reply With Quote
Old 04-06-2015, 02:09 AM   #5
Senior Member
 
Shane Wood's Avatar
 
Join Date: Nov 2014
Posts: 2,032
Send a message via AIM to Shane Wood Send a message via MSN to Shane Wood Send a message via Yahoo to Shane Wood
Quote:
Originally Posted by Neil&Nancy View Post
Hello. We have been full-timing in our 36 RL for 2 years. We arrived in Myrtle Beach yesterday, and the bedroom slider no longer moves in or out! After investigation, we realized that one motor is working and one is not! We need to get that motor out for repair or replacement. However, since the slider is in and no longer will come out, we can not get to the screw that will release the motor.

Question is "does anyone know how to manually move the slide out"?
I had the same thing happen and it was not a bad motor. I simply sprayed the motor with CRC and it worked as good as new. My motor would engage and stop after 1 1/2. Is your motor trying to move the slide. I also had one of the white control boards quit working and once replaced they worked fine. Dave has a post on how to lube the swintech slide. We were in one place for 5 mths and the slide wouldn't move all it needed was lubed. I now do it every couple mths.
__________________
2015 36RL pushing a 2015 Denali
Shane Wood is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Redwood RV or any of its affiliates. This is an independent, unofficial site.


All times are GMT +1. The time now is 10:04 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×