Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 01-19-2016, 03:09 AM   #1
Member
 
Join Date: Jan 2016
Posts: 31
update lighting fixture

good afternoon all,

i have been thinking about replacing my kitchen light fixtures. Those lights are run off the 12v system. Looking online the choices of 12v light fixtures aren't very extensive and don't look as nice as the 120v fixtures. would it be possible to wire the 120v fixture to the existing 12v wiring? i know the only difference in a 120v and 12v should be a ground wire. i did find a fixture i liked that fit 120v gu10 bulbs, the same bulbs are also made in 12v. has anyone ever tried this upgrade and have any advice for me?

thank you
Bjesquivel is offline   Reply With Quote
Old 01-19-2016, 04:24 AM   #2
Senior Member
 
Join Date: Aug 2015
Posts: 395
That shouldn't be a problem at all. I would test it with one bulb on the workbench to make sure you get the polarity correct. Electrically, should be easy. Mounting it to the ceiling would be my concern.
__________________
Scott
2015 38GK, Titan Brakes, H 114 Tires, IS
2015 Denali Dually
bergeman is offline   Reply With Quote
Old 01-19-2016, 02:07 PM   #3
Site Team
 
hoosierguy's Avatar
 
Join Date: Nov 2011
Posts: 1,340
Quote:
Originally Posted by Bjesquivel View Post
good afternoon all,

i have been thinking about replacing my kitchen light fixtures. Those lights are run off the 12v system. Looking online the choices of 12v light fixtures aren't very extensive and don't look as nice as the 120v fixtures. would it be possible to wire the 120v fixture to the existing 12v wiring? i know the only difference in a 120v and 12v should be a ground wire. i did find a fixture i liked that fit 120v gu10 bulbs, the same bulbs are also made in 12v. has anyone ever tried this upgrade and have any advice for me?

thank you
You need to be very cautious here. If you are asking this question, I don't believe you have the electrical knowledge to tackle this job.

Reasons:

1. What you say about the wiring/cable is not true. The wire insulation rating of the 12 VDC cable is likely not sufficient to handle 120 VAC so the cable going to those kitchen ceiling light fixtures would need to be changed or replaced.

2. The switching would need to be changed because those 12 VDC switches are not designed to handle 120 VAC.

3. If the wiring change is not thought through carefully and correctly and made sure that there are no crossover connections to any of the 12 VDC wiring, you could blow out every 12 VDC fixture/circuit (refrigerator, furnace, A/C thermostat, converter, etc.) in the trailer and cause extensive damage and possibly even fire.

4. If you are bound to go ahead with this type of rework/change, get a qualified/licensed and bonded electrician to do the work. It can be done but not for the inexperienced DYI.

Again, be very cautious. JMHO

I am not an electrician although I have done extensive electrical work. I am a retired Electrical/Electronics Engineer.

Guy
__________________
Guy & Phyllis
2012 RW36RL,DualA/C,KodiakDiskBrakes,TrailAir Tri-Glide,GY_G614's,Roadmaster Comfort Ride Slipper Spring Suspension
2011Dodge3500Laramie,CrewCab,4x4,SRW,Michelins, LongBed,6.7LCTD,3.73,PullRiteSuper5th20.5KHitch, BlueOxBedsaver

hoosierguy is offline   Reply With Quote
Old 01-19-2016, 03:33 PM   #4
Site Team
 
piper guy's Avatar
 
Join Date: Dec 2012
Posts: 1,986
Guy ~ I think he wants to use a 120v fixture but keep it 12v wiring and use 12v bulbs if I read his post correctly.
__________________
Vaughan & Tracy 2013 RW 36RL, 2013 F350 DRW CC, 2016 Focus. MorRyde IS, MorRyde pinbox, disc brakes, Comfort Ride Hitch. "Life is to be embraced, Grab it with both arms ! "
piper guy is offline   Reply With Quote
Old 01-19-2016, 03:37 PM   #5
Senior Member
 
sinder's Avatar
 
Join Date: Jan 2012
Posts: 506
It sounds like you are wanting to wire the existing 12v DC wiring to 120v AC fixture. You can do this as long as you continue to run 12v DC through the new fixture. But as mentioned you need to get the polarity right Other things to consider is the 120V AC fixture will have heavy gauge wire vs your existing 12v DC wiring, and lastly you may not be pleased with the lumens produced running 12V DC through a 120V AC designed light bulb. The filaments in standard 120v bulb are designed to work with a voltage of around 120v, which is an unusual range for batteries/12v DC. Therefore you need to find a bulb that matches your 12v DC and current. One of two things could happen to a standard 120v bulb: 1) The filament could not glow or barely glow. 2) The DC voltage and current could vaporize the filament in the bulb.
__________________
Dean & Pam - SOB
sinder is offline   Reply With Quote
Old 01-19-2016, 03:46 PM   #6
Senior Member
 
mhs4771's Avatar
 
Join Date: Jan 2012
Posts: 2,807
A little confusion here and I'm not exactly which direction it's going.
On our Montana we did install some standard household 120VAC fixtures and used Camco (I think) 12V Twisty Lights. As a matter of fact I have about half a dozen at home in the garage if anyone is interested.
Now if you're thinking of changing from the 12VDC lighting to 120VAC lighting, I wouldn't do it because of all the problems that would be encountered.
__________________
Michelle & Ann
2018 Chevy 3500HD Crew Cab High Country DRW, D/A, 2016 RW39MB, Dual ACs, Auto Level, Auto Sat Dish, Stack W/D, King Sleep #, 17.5" Sailuns w/Disc, MORryde IS & Pin, Comfort Ride Hitch, 5.5 Onan, Res Fridge & Induction Cook Top
mhs4771 is online now   Reply With Quote
Old 01-19-2016, 05:25 PM   #7
Site Team
 
hoosierguy's Avatar
 
Join Date: Nov 2011
Posts: 1,340
Quote:
Originally Posted by Bjesquivel View Post
good afternoon all,

i have been thinking about replacing my kitchen light fixtures. Those lights are run off the 12v system. Looking online the choices of 12v light fixtures aren't very extensive and don't look as nice as the 120v fixtures. would it be possible to wire the 120v fixture to the existing 12v wiring? i know the only difference in a 120v and 12v should be a ground wire. i did find a fixture i liked that fit 120v gu10 bulbs, the same bulbs are also made in 12v. has anyone ever tried this upgrade and have any advice for me?

thank you
I may have misunderstood your post..............

If you are wanting to use 120 VAC fixtures in place of the the 12 VDC fixtures and use 12 VDC lamps (that have the same as 120 VAC socket configuration), your main concern will be to keep the polarity (as determined by a voltmeter) of the 12 VDC source straight and connect positive (of 12 VDC source) to the black lead on the fixture and negative (of 12 VDC source) to the white lead and ground lead on the fixture.

Sorry for any confusion on my part. I hope this helps.
__________________
Guy & Phyllis
2012 RW36RL,DualA/C,KodiakDiskBrakes,TrailAir Tri-Glide,GY_G614's,Roadmaster Comfort Ride Slipper Spring Suspension
2011Dodge3500Laramie,CrewCab,4x4,SRW,Michelins, LongBed,6.7LCTD,3.73,PullRiteSuper5th20.5KHitch, BlueOxBedsaver

hoosierguy is offline   Reply With Quote
Old 01-19-2016, 07:59 PM   #8
Senior Member
 
Rick and Mindy's Avatar
 
Join Date: Feb 2013
Posts: 1,444
I, for one, would not be changing a fixture that does not match the wiring. I cannot tell you how many times I have encountered someone messing with circuit breakers and switching them for higher breakers when the wiring is not rated for it. I have found this in homes I have purchased so we are talking about about AC. My concern would be subsequent owners of this RV down the road. For example, they notice that the fixture is a 120AC and can't figure out why their light bulb won't work right in the fixture so they investigate and decide that the fixture was miswired to the 12V system so they switch the wire to the 120 breaker. Weirder things have happened so don't say that this couldn't haappen. You say, well, before I trade or sell, I will remember to change it back but years go by and you forget about it. Not worth the potential lawsuit. Unless you are going to do it right, I wouldn't take the risk. Just my honest opinion.
__________________
Rick and Mindy
Retired
2013 Redwood 31SL, 2011 Ford F350 SRW, 6.7, Crew Cab with Firestone Bags, Titan Disc Brakes
Rick and Mindy is offline   Reply With Quote
Old 01-20-2016, 12:13 AM   #9
Senior Member
 
atom ant's Avatar
 
Join Date: Feb 2013
Posts: 7,101
If I understand what you are asking, I did that on my Montana. I installed a standard light fixture for a house, used the existing 12v wiring and 12V bulbs from Camping World (mine were screw in). Shouldn't be a problem.

I actually tied the fixture ground to the 12V ground side of the pair, because I just didn't have the heart to cut it off . If I remember, the color stripe on the 12V zip cord used buy Redwood is the positive, and the non-colored white all return back to the 12V ground buss bar, but I would check if with a meter or test light before you tie in the ground.
__________________
Brad & Dory - Lone Tree, CO
CURRENT - 2013 Itasca Meridian 42E/2013 Wrangler 4dr Sahara
SOLD - 2014 Redwood 36RL/2014 F350 DRW
atom ant is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Redwood RV or any of its affiliates. This is an independent, unofficial site.


All times are GMT +1. The time now is 10:35 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×