Slide adjustments?

[Germans]

Does or has anyone adjusted their slides. My dinette slide is lower by the door than other side. Do you adjust up or down to raise lowered side? Big slide with complete kitchen and entertainment center seems to bow in middle. Can it be raised or rollers added to help?
Thanks for any insight or help.

[garylk0826]

The welds broke on the head assembly on one end of ours not allowing the front end of the slide to retract completely. I cut the plate off, straightened it and welded it back on and added gussets to reinforce it. It works correctly now. First check to make sure everything is OK on the linkage. Attached is the link to the LCI manuals showing how to adjust the slide. I don't feel they used heavy enough parts. https://support.lci1.com/2-x-2-hydraulic-slide-system

[wirkusd]

Lots of videos out there for adjusting slides. Just remember to make very small adjustments as a wee bit goes a long way.

[Eugene_Elder]

Yes. I just had an RV dealer adjust both of my main slides in our 2013 36RL. It took them over 5 hours due to changing angles, lowering, and sliding them to the right. I did not want to do it, even though I know-how. The biggest issue was sliding them to the right. It's easier with a forklift.