Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 01-02-2013, 01:45 PM   #1
Site Team
 
piper guy's Avatar
 
Join Date: Dec 2012
Posts: 1,986
I'm still a newbie at this but want to make sure I do it right. I have a 2012 F350 as a tow vehicle with a 36RL. What is the proper method to set the brake gain for the trailer ? Right now I have it set at 7 and the rig stops fine, but I'm presuming there is a right way to do it. Don't really want to do a search on the internet as you're never quite sure of the info you get. I'd much rather listen to opinions from those of you that tow regularly.



thanks in advance
__________________
Vaughan & Tracy 2013 RW 36RL, 2013 F350 DRW CC, 2016 Focus. MorRyde IS, MorRyde pinbox, disc brakes, Comfort Ride Hitch. "Life is to be embraced, Grab it with both arms ! "
piper guy is offline   Reply With Quote
Old 01-02-2013, 03:47 PM   #2
Senior Member
 
mhs4771's Avatar
 
Join Date: Jan 2012
Posts: 2,807


Each RV and TV combination is slightly different, Electric Drums vs Disc, 250/2500 vs 250/3500, SRW vs DRWetc. I would look in you're Fords owner's manual under the towing section. Should give you a starting point, from there is mostly trial and error. You don't want the RV brakes to lock up when on wet pavement or loose gravel, but you want to apply enough force to help stop the whole setup when the light suddenly changes to Red on you.
__________________
Michelle & Ann
2018 Chevy 3500HD Crew Cab High Country DRW, D/A, 2016 RW39MB, Dual ACs, Auto Level, Auto Sat Dish, Stack W/D, King Sleep #, 17.5" Sailuns w/Disc, MORryde IS & Pin, Comfort Ride Hitch, 5.5 Onan, Res Fridge & Induction Cook Top
mhs4771 is offline   Reply With Quote
Old 01-02-2013, 03:56 PM   #3
Site Team
 
Dave&Ginny's Avatar
 
Join Date: Jan 2012
Posts: 5,407
I have a 2012 F350 Dually pulling a 2012 RL with disk brakes. With the trailer loaded heavy (1/3 tank of fresh water) I have my controller set at 9. When the trailer is empty (which doesn't happen often) I turn it down to around 7.

My determining factor is that I want the trailer to respond when I apply the brakes as quick as possible without locking up the wheels. I have had a few emergencies where I was traveling at highway speeds (65-70) and had to stand on the brakes to bring the rig to a complete stop quickly. I really didn't think I was going to be able to stop in time and was considering the ditch. The rig stopped very quickly, in a straight line....very impressive....I did burn a few tires on that one.
__________________
SOB "The RV Wiseguy"
Dave&Ginny is offline   Reply With Quote
Old 01-02-2013, 04:01 PM   #4
Site Team
 
Dave&Ginny's Avatar
 
Join Date: Jan 2012
Posts: 5,407
One more thing to consider......if the truck does most of the braking, you have a good chance of "Jack Knifing" the rig in an emergency stop. If the trailer does too much of the braking, your trailer brakes will warp, fade and you'll be in trouble when you need to stop.

Happy Trails
__________________
SOB "The RV Wiseguy"
Dave&Ginny is offline   Reply With Quote
Old 01-02-2013, 05:22 PM   #5
Site Team
 
piper guy's Avatar
 
Join Date: Dec 2012
Posts: 1,986
Thanks all ! That was the response I was looking for and many thanks for the advice.
__________________
Vaughan & Tracy 2013 RW 36RL, 2013 F350 DRW CC, 2016 Focus. MorRyde IS, MorRyde pinbox, disc brakes, Comfort Ride Hitch. "Life is to be embraced, Grab it with both arms ! "
piper guy is offline   Reply With Quote
Old 01-02-2013, 08:14 PM   #6
Senior Member
 
Adamsvr's Avatar
 
Join Date: Jan 2012
Posts: 596
I think every situation merits its own break gain. Ford sets its standard break gain at 6.5. Going over some of mountains in SD and WY can be tricky.Too much break gain slows you down going up, but really helps going down. Experiment with what's right for your Redwood and the terrain you are traversing. I normally just leave ours at the factory setting and keep my foot off the break when starting off.
Adamsvr is offline   Reply With Quote
Old 01-02-2013, 08:46 PM   #7
Senior Member
 
Join Date: Jan 2012
Posts: 464
I agree with Dave and Adam. We have an F350 Dually and a 38 BR. When we went to Nova Scotia and back this summer I had the gain set at 6.5 or 7.0. I turned it up on the back roads in New Brunswick where the hills were as much as 13%. I also used the manual setting on my transmission to use the diesel brake as much as possible to control my speed when going down those grades.
__________________
2016 F-350 Crew Cab 4x4 Dually Diesel, 2013 38BR Office config with all options and upgrades but Ceiling Fan and Ice Maker.
BradPAjax is offline   Reply With Quote
Old 01-03-2013, 08:42 AM   #8
Senior Member
 
rcflame's Avatar
 
Join Date: Aug 2012
Posts: 619
The instructions I have read for most of the controllers say to go to an empty parking lot or some place similar, go 10-20 miles an hour and apply the brakes. Adjust the gain until the brakes on the trailer are to the point of locking up, and than back off slightly. This should give you a starting point. You may have to do slight adjustments to meet your personal preference.
__________________
Roger & Cheryl Full Time since 2002, RVing since 1975 2008 Chevy 3500 Crew Cab Dually, 2012 RW 36RL
rcflame is offline   Reply With Quote
Old 01-03-2013, 01:39 PM   #9
Senior Member
 
5th_Time's Avatar
 
Join Date: Mar 2012
Posts: 1,136
I think those instructions are for the electric drums. If you have disk brakes, I don't think you can "smoke the tires". Much less prone to brake fade though...
__________________
Mike & Pam '12 36RL, Kodiak Discs, 17.5" G114s H-Rated, SRE4000 w/HD Shackles, Joy Rider Shocks, Flex Air, 5.5 Onan, W&D, DW, 4 Scare Lights, (2) 6V Trojan T-145s; Progressive EMS-HW50C, Winegard DTV Sat, Sony/Denon 4K Home Theater, WiFiRanger EliteAC Pack, weBoost 4G-X Cell Booster.

2022 RAM 3500 Limited CC, LB, 4x4, DRW, Max Tow, Cummins HO, AISIN, 4.10, Mopar 30K w/OEM Prep, Transfer Flow 70gal Aux Tank/Toolbox.
5th_Time is offline   Reply With Quote
Old 01-03-2013, 06:44 PM   #10
Dan
Senior Member
 
Dan's Avatar
 
Join Date: Mar 2012
Posts: 619

Quote:
Originally Posted by 5th_Time
I think those instructions are for the electric drums. If you have disk brakes, I don't think you can "smoke the tires". Much less prone to brake fade though...

oh you can smoke the tires I have done it a couple of times coming down themountainand some idiot pulls right out in front of you


Dan


__________________

07 Dodge 3500, Exhaust Brake, Edge Programer, Killer "B" Turbo
13 RL ALL options except Gen and W/D
Dan is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Redwood RV or any of its affiliates. This is an independent, unofficial site.


All times are GMT +1. The time now is 07:50 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×