|
05-13-2012, 05:44 PM
|
#1
|
Member
Join Date: May 2012
Posts: 31
|
I have a 2012 36 RE with an island that has two hanging lights over the counter. This may seem like a dumb question, but the one bulb burned out, and I am not sure how to change. When I try to unscrew the bulb, the bulb remains tight, but the entire fixture starts to unscrew. I have tried to push up and twist, and again no luck. Any thoughts on how to get the bulb out?
Thank you.
__________________
Gary
|
|
|
05-13-2012, 07:19 PM
|
#2
|
Senior Member
Join Date: Jan 2012
Posts: 2,811
|
We have an RL with the Island and the two bulbs over it are single contact bayonet bulbs, the same as over the Table. They should just push up a little and turn about a quarter of a turn and pull out. Sorry don't recall which way they turn.
__________________
Michelle & Ann
2018 Chevy 3500HD Crew Cab High Country DRW, D/A, 2016 RW39MB, Dual ACs, Auto Level, Auto Sat Dish, Stack W/D, King Sleep #, 17.5" Sailuns w/Disc, MORryde IS & Pin, Comfort Ride Hitch, 5.5 Onan, Res Fridge & Induction Cook Top
|
|
|
05-13-2012, 11:11 PM
|
#3
|
Senior Member
Join Date: Jan 2012
Posts: 464
|
Should be Righty Tighty Lefty Loosey... if my memory of auto bulbs from back in the day are correct.
__________________
2016 F-350 Crew Cab 4x4 Dually Diesel, 2013 38BR Office config with all options and upgrades but Ceiling Fan and Ice Maker.
|
|
|
05-15-2012, 02:19 PM
|
#4
|
Member
Join Date: May 2012
Posts: 31
|
Thanks for the info. I have tried to just turn, and I have tried to push up on the bulb. When I turn the bulb the entire socket turns, and when I try to push up on the bulb, it does not appear to have any give. I just didn't want to break the bulb when trying to replace.
Gary
__________________
Gary
|
|
|
05-18-2012, 05:13 PM
|
#5
|
Junior Member
Join Date: Jan 2012
Posts: 9
|
The don't come out easy. Push hard, quarter turn left (holding the fixture so it doesn't turn too), then pull hard. We have a 2012 RL we bought in Oct '11. We've replaced each of these two bulbs twice already. Best of luck.
__________________
Lon $ Connie
|
|
|
05-18-2012, 10:35 PM
|
#6
|
Guest
|
you need push hard,
Righty tighty Lefty Loose,if can't you ask someone to replace a new bulb.</span>
|
|
|
05-19-2012, 07:20 AM
|
#7
|
Senior Member
Join Date: Jan 2012
Posts: 596
|
None of the above blubs work - for a 36RL island light they are a 1076 dual contact bayonet base. To remove them push up on them and turn to the left 1/4 turn. They are available a Camping World for under two dollars for two.
|
|
|
05-21-2012, 10:39 AM
|
#8
|
Senior Member
Join Date: Dec 2011
Posts: 165
|
Quote:
Originally Posted by gfshaffer
I have a 2012 36 RE with an island that has two hanging lights over the counter. This may seem like a dumb question, but the one bulb burned out, and I am not sure how to change. When I try to unscrew the bulb, the bulb remains tight, but the entire fixture starts to unscrew. I have tried to push up and twist, and again no luck. Any thoughts on how to get the bulb out?
Thank you.
|
We have the same two hanging lights in our 36RL.We have change them over toLED's. They make adaptor that will plug in to the socket.
|
|
|
05-21-2012, 11:15 AM
|
#9
|
Senior Member
Join Date: Mar 2012
Posts: 1,136
|
Forum Members:
When you have a solution to offer, such as LED bulbs, adapters, wax, satellite dishes, etc. please be sure to mention a source,part number, and priceso that others can take advantage of your kindness...
This will savemembers a lot of research time
__________________
Mike & Pam '12 36RL, Kodiak Discs, 17.5" G114s H-Rated, SRE4000 w/HD Shackles, Joy Rider Shocks, Flex Air, 5.5 Onan, W&D, DW, 4 Scare Lights, (2) 6V Trojan T-145s; Progressive EMS-HW50C, Winegard DTV Sat, Sony/Denon 4K Home Theater, WiFiRanger EliteAC Pack, weBoost 4G-X Cell Booster.
2022 RAM 3500 Limited CC, LB, 4x4, DRW, Max Tow, Cummins HO, AISIN, 4.10, Mopar 30K w/OEM Prep, Transfer Flow 70gal Aux Tank/Toolbox.
|
|
|
05-21-2012, 07:55 PM
|
#10
|
Senior Member
Join Date: Jan 2012
Posts: 2,811
|
Okay, the lites over the counter and table must be another area of change by Redwood. I just went out and checked ours (36RL built mid April) and they are a single contact bayonet mini-globe (approx 1.5" in diameter). So a word of caution, before you go buy replacements, check to see which type you have.
__________________
Michelle & Ann
2018 Chevy 3500HD Crew Cab High Country DRW, D/A, 2016 RW39MB, Dual ACs, Auto Level, Auto Sat Dish, Stack W/D, King Sleep #, 17.5" Sailuns w/Disc, MORryde IS & Pin, Comfort Ride Hitch, 5.5 Onan, Res Fridge & Induction Cook Top
|
|
|
05-23-2012, 07:48 AM
|
#11
|
Junior Member
Join Date: May 2012
Posts: 2
|
did it work?Edited by: krisfelix
|
|
|
05-23-2012, 08:00 AM
|
#12
|
Member
Join Date: May 2012
Posts: 31
|
Finally got the bulb out by holding base, pushing up, and turning left. I had to use quite a bit of force pushing up and turning, but it came out. Thanks to all for your suggestions!
__________________
Gary
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|