Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-08-2020, 07:27 PM   #1
Senior Member
 
Join Date: Jul 2014
Posts: 134
7 pin connection junction box wiring diagram

My left turn signal stopped working. Thought it was the bulb. well they are not bulbs, but a housing. So I decided to check that and all the bulbs work connected to a battery. I checked the truck 7 pin and I have power at the left turn/brake pin. So I decided to check the trailer 7 pin connections in the junction box mounted on the hitch. when I pulled the cover off and started pulling the wires out a couple of wire nuts fell off and the wires came apart. So I am not sure which wires go to which wires. Does anyone have a wiring diagram for the connection box for the 7 pin connector?
__________________
Rob & Kathy
2015 39MB
2014 Dodge 3500 Big Horn Manual Transmission
robkathybat is offline   Reply With Quote
Old 08-10-2020, 10:34 PM   #2
Senior Member
 
xtasee's Avatar
 
Join Date: Oct 2015
Posts: 500
There will not be a diagram for that wiring. Mine was all done wrong in that box from the factory new delivery. That included the brake wiring that was wrong. Your best bet will be a test light and tracing.
__________________
Larry, Stephanie Park City, Utah
2017 31SL King, 8K axles, Disc Brakes,17.5 Goodyear H tires,BU Camera,5.5 Onan, Heated HT pads, Two Uniguard Awnings, Slide Toppers, 2000w PSW inverter
xtasee is offline   Reply With Quote
Old 08-11-2020, 02:46 PM   #3
Senior Member
 
Join Date: Jul 2014
Posts: 134
I actually used my continuity meter and a 12V battery to test each wire and I think I have figured it out. I haven't actually hooked up the truck yet, but according to the 7 pin wiring diagram I have everything correct, and my left turn signal works, at least with the 12V battery.
__________________
Rob & Kathy
2015 39MB
2014 Dodge 3500 Big Horn Manual Transmission
robkathybat is offline   Reply With Quote
Old 08-15-2020, 01:13 PM   #4
Junior Member
 
jrlsburns's Avatar
 
Join Date: Oct 2018
Posts: 24
Junction Box Congested

Found junction box crammed full when doing disc brake mod. Went back with a larger junction box.
Attached Images
File Type: jpg 20181204_144914.jpg (156.4 KB, 17 views)
File Type: jpg 20200815_075228.jpg (89.8 KB, 22 views)
jrlsburns is offline   Reply With Quote
Old 08-16-2020, 08:34 PM   #5
Senior Member
 
Join Date: Jul 2014
Posts: 134
Yes it is pretty crammed with wires. I backed the truck up and connected it and the left turn signal did not work after all that I had done. Pulled out the manual for the truck and lo and behold there is a separate fuse for the trailer left turn/stop light (20 amp fuse) and it was blown (truck lights still worked). When I originally tested the truck 7 pin I must have tested the wrong pin. I've always been if the truck lights work the trailer lights should work. Learned something new. The fuse blowing is still a mystery, slight chance it was because the wire nuts had come loose, so all my work was not in vane. Only time will tell.
__________________
Rob & Kathy
2015 39MB
2014 Dodge 3500 Big Horn Manual Transmission
robkathybat is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Redwood RV or any of its affiliates. This is an independent, unofficial site.


All times are GMT +1. The time now is 08:51 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×