Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 04-29-2015, 10:30 PM   #1
Senior Member
 
Join Date: Jan 2014
Posts: 273
2015 38RL - Grey Water Tank Size?

The Galley Grey tank fills up much faster than the Shower Grey tank.

I read the manual but could not find the actual tank size.

Redwoods homepage says "90 Gallons Grey Water".

Does anyone know if they both are 45 Gallons each?
BasilFawlty is offline   Reply With Quote
Old 04-29-2015, 10:44 PM   #2
Site Team
 
piper guy's Avatar
 
Join Date: Dec 2012
Posts: 1,986
They are 45 gallons each. Best way to equalize them is to add a valve at the outlet and then you can close that valve and open both grey valves and they will equalize.
__________________
Vaughan & Tracy 2013 RW 36RL, 2013 F350 DRW CC, 2016 Focus. MorRyde IS, MorRyde pinbox, disc brakes, Comfort Ride Hitch. "Life is to be embraced, Grab it with both arms ! "
piper guy is offline   Reply With Quote
Old 04-29-2015, 11:08 PM   #3
Senior Member
 
Join Date: Jan 2014
Posts: 273
Thanks for the fast answer! We have a back flush valve to flush out the grey tanks and the galley tank seems to fill much faster. Most likely just dirty sensors then if they are equal in size.
BasilFawlty is offline   Reply With Quote
Old 04-30-2015, 12:03 AM   #4
Senior Member
 
Rick and Mindy's Avatar
 
Join Date: Feb 2013
Posts: 1,444
They are 45 gallons each but the way Redwood hooked mine up just doesn't make sense. That's why we purchased the additional slide valve to allow us to open both gray tanks so they will equalize. On my 31SL, all the water from the kitchen and shower go into one tank and only the bathroom sink goes into the other. Doesn't make sense as it takes a long time to fill up the tank with only the bathroom sink and the other one will fill fast with everything else going into it.
__________________
Rick and Mindy
Retired
2013 Redwood 31SL, 2011 Ford F350 SRW, 6.7, Crew Cab with Firestone Bags, Titan Disc Brakes
Rick and Mindy is offline   Reply With Quote
Old 04-30-2015, 02:20 AM   #5
Site Team
 
piper guy's Avatar
 
Join Date: Dec 2012
Posts: 1,986
The 36RL is the same way. The other tank is set up for the Washer Dryer and the bathroom sink. Definitely add the slide valve on the end to equalize the tanks.
__________________
Vaughan & Tracy 2013 RW 36RL, 2013 F350 DRW CC, 2016 Focus. MorRyde IS, MorRyde pinbox, disc brakes, Comfort Ride Hitch. "Life is to be embraced, Grab it with both arms ! "
piper guy is offline   Reply With Quote
Old 04-30-2015, 04:22 AM   #6
Senior Member
 
Join Date: Feb 2014
Posts: 545
This method of installing a valve at the sewer exit apparently works on some but not all models. I tried it on my 38gk. The galley tank is mounted below the grey tank. Once the galley tank is full, water backs up and leaks from the ptraps into the belly. Unfortunately it doesn't back fill into the grey tank on my model. I sure wish it did as it would be helpful when boondocking.

Ken
brenkco is offline   Reply With Quote
Old 04-30-2015, 01:00 PM   #7
Junior Member
 
Bill n Diana's Avatar
 
Join Date: Nov 2014
Posts: 26
Ken,

What model RW do you have???

I am considering this with my 38FL.

Bill n Diana
__________________
South of Petersburg Virginia

His TV: 2014 RAM 3500 MC DRW 6.7 CTD AISIN
His RV: 2014 REDWOOD 38FL (House)
Her TV: 2013 RAM 1500 CC 5.7 Hemi
Her RV: 2010 VCross 20VFB (Camper)
Bill n Diana is offline   Reply With Quote
Old 04-30-2015, 01:59 PM   #8
Senior Member
 
Rick and Mindy's Avatar
 
Join Date: Feb 2013
Posts: 1,444
Quote:
Originally Posted by brenkco View Post
This method of installing a valve at the sewer exit apparently works on some but not all models. I tried it on my 38gk. The galley tank is mounted below the grey tank. Once the galley tank is full, water backs up and leaks from the ptraps into the belly. Unfortunately it doesn't back fill into the grey tank on my model. I sure wish it did as it would be helpful when boondocking.

Ken
Ken, help me out here. In my mind I'm trying to understand why your gray water will not back fill into the gray tank once the galley tank is full. I'm no plumber but your p traps have to be higher than both tanks. If you have both gray tank valves open and the sewer exit valve closed then I would think the gray tank would start to fill before the water can get high enough to get back into the p traps. Maybe it's just too early in the morning to be trying to think this out!
__________________
Rick and Mindy
Retired
2013 Redwood 31SL, 2011 Ford F350 SRW, 6.7, Crew Cab with Firestone Bags, Titan Disc Brakes
Rick and Mindy is offline   Reply With Quote
Old 04-30-2015, 03:08 PM   #9
Senior Member
 
Join Date: Feb 2014
Posts: 545
Bill & Diana, I have a 2014 38GK. I'd sure give it a try to see if it works for you.

Rick and Mindy,
Not exactly sure why but I tested it a few times with the same results.

I'm really only guessing at the location of the leak as I was not able to actually find it, I just observed the results. Closing the valve at the sewer exit, I let the galley tank fill. The source for our galley tank is the shower, kitchen sink including dishwasher.

When full, it leaked all through the belly pan and on to the ground. My assumption that it was the trap maybe incorrect as I have tested it by filling the galley tank with the galley tank valve closed. This resulted in the water backing up into the shower. I may have not let it sit long enough for it to have leaked in the traps. The only other place it could be leaking is through the vent pipe. My black tank had failed (and was replaced) due to a bad spin weld on the vent pipe. When the black tank was full, it leaked around the vent pipe spin weld and leaked through the belly pan.

I am also assuming that the galley tank is mounted lower than the grey tank. Water going up hill may contribute to the problem. Before the RV's came out with the drop frame, the grey and galley tanks were at the same level, thus the solution of using the end valve and opening both tanks worked. It sure doesn't for my rig.

In any event, when we try to back the galley tank into the grey tank, we have a mess! We really hoped this would work for us too as it's a shame to have a empty grey tank when boon docking!!

Ken
brenkco is offline   Reply With Quote
Old 04-30-2015, 03:39 PM   #10
Senior Member
 
Rick and Mindy's Avatar
 
Join Date: Feb 2013
Posts: 1,444
Ken, sorry to hear that this system doesn't seem to work for you. I don't want to be repetitive but you don't say that you leave both gray water valves open. I just want to make sure that that is what you are doing. My thought is that if it only leaks when you use the exit valve then the leak is occurring somewhere from the drain line of the tank to the exit valve because you say the tank doesn't leak when you keep the galley valve closed. Have you tried filling the other gray tank while leaving it's valve open and the exit valve closed? That would tell you if the leak is occurring from the gray valve to the exit valve and not from the tank up to the traps. Just trying to think of all possibilities.
__________________
Rick and Mindy
Retired
2013 Redwood 31SL, 2011 Ford F350 SRW, 6.7, Crew Cab with Firestone Bags, Titan Disc Brakes
Rick and Mindy is offline   Reply With Quote
Old 04-30-2015, 03:49 PM   #11
Senior Member
 
Join Date: Feb 2014
Posts: 545
No Rick, both tank valves were open, only the exit valve was closed. Some waste water did back up into the grey tank but a majority leaked.


I can only assume that the pressure is causing leaks due to water trying to run up hill.


Ken
brenkco is offline   Reply With Quote
Old 04-30-2015, 04:12 PM   #12
Senior Member
 
Rick and Mindy's Avatar
 
Join Date: Feb 2013
Posts: 1,444
Quote:
Originally Posted by brenkco View Post
No Rick, both tank valves were open, only the exit valve was closed. Some waste water did back up into the grey tank but a majority leaked.


I can only assume that the pressure is causing leaks due to water trying to run up hill.


Ken
Ok Ken, I give up. Maybe someone else on this forum may have suggestions. Again, I know your frustration in not being able to utilize the total 90 gallons when you need it. That extra 45 gallons can make the difference in dumping every other day to once every 5 or 6 days.
__________________
Rick and Mindy
Retired
2013 Redwood 31SL, 2011 Ford F350 SRW, 6.7, Crew Cab with Firestone Bags, Titan Disc Brakes
Rick and Mindy is offline   Reply With Quote
Old 04-30-2015, 04:22 PM   #13
Senior Member
 
Join Date: Feb 2014
Posts: 545
Thanks for your thoughts, Rick.


I have tried a few posts some time ago on this and the other forum. Not sure that there is much else that can be done...kinda one of those oh well.....and live with it!!


Ken
brenkco is offline   Reply With Quote
Old 04-30-2015, 08:03 PM   #14
Junior Member
 
Bill n Diana's Avatar
 
Join Date: Nov 2014
Posts: 26
In reading through this whole string the only thing that I can think of given everyone's great input is that there is a joint that is not completely sealed between the two gate/knife valves.

Normally the stretch of drain pipe between the gate/knife valve does not have to hold water... the drain water runs through it but it does not hold water for any real period of time... When we add another valve at the end to make use of both holding tanks we now have more pipe that must be waterproof / sealed completely...

The kicker to all of this is finding where that one(?) spot might be that needs to be completely sealed... I am not sure I would ever consider undertaking that task given what is involved in gaining visibility to those underbelly areas... And I am not sure that all dealers would voluntarily do this work when we are using this system beyond its intended purpose...

Don't get me wrong, I think the manuafacuturer should have ensured that all joints were completely sealed; but I am also confident that they would not have added another gate/knife valve to test those seams below the original valves.

At some point we all have to determine whether the juice is worth the squeeze.

Happy Travels,

Bill n Diana
__________________
South of Petersburg Virginia

His TV: 2014 RAM 3500 MC DRW 6.7 CTD AISIN
His RV: 2014 REDWOOD 38FL (House)
Her TV: 2013 RAM 1500 CC 5.7 Hemi
Her RV: 2010 VCross 20VFB (Camper)
Bill n Diana is offline   Reply With Quote
Old 04-30-2015, 10:42 PM   #15
Senior Member
 
mhs4771's Avatar
 
Join Date: Jan 2012
Posts: 2,807
Ditto, Bill must have read my mind (a really short story) and beat me to the post.
__________________
Michelle & Ann
2018 Chevy 3500HD Crew Cab High Country DRW, D/A, 2016 RW39MB, Dual ACs, Auto Level, Auto Sat Dish, Stack W/D, King Sleep #, 17.5" Sailuns w/Disc, MORryde IS & Pin, Comfort Ride Hitch, 5.5 Onan, Res Fridge & Induction Cook Top
mhs4771 is offline   Reply With Quote
Old 05-01-2015, 01:43 AM   #16
Senior Member
 
Join Date: Feb 2014
Posts: 545
Quote:
Originally Posted by Bill n Diana View Post
And I am not sure that all dealers would voluntarily do this work when we are using this system beyond its intended purpose...

Bill n Diana
Bill,

This we can agree on as I tried. Truly beyond it's intended purpose! However, I have disproven your theory about the two valves. I regularly open both the grey tank valves and just use the secondary valve to dump the tanks when parked for a while.....no leaks whatsoever. Therefore, one can conclude that the drains from the factory valves to the secondary exit valve is secure.

I am currently traveling with a bunch of Montana owners, some of which have the old style frames where the tanks are mounted at the same horizontal level. The tanks equalize perfectly.

The consensus of this group is that drain pipes are not intended to take pressure. The full lower tank combined with the upper tank creating gravity feed pressure applies enough force not contemplated by the drains. I still suspect that it is probably the spin weld on the vent pipe of the galley tank......

But as you eloquently said,

Quote:
Originally Posted by Bill n Diana View Post

At some point we all have to determine whether the juice is worth the squeeze.


Bill n Diana
Thanks for your feed back and assist!

Ken
brenkco is offline   Reply With Quote
Old 05-01-2015, 12:34 PM   #17
Junior Member
 
Bill n Diana's Avatar
 
Join Date: Nov 2014
Posts: 26
Ken,

While I thought there might be two different levels the tanks sat I didn't know as my 38FL has all the tanks at a single level...

As Sheldon Cooper once said, "Gravity..., thou art a heartless biotch..."

Happy Travels.

Bill n Diana
__________________
South of Petersburg Virginia

His TV: 2014 RAM 3500 MC DRW 6.7 CTD AISIN
His RV: 2014 REDWOOD 38FL (House)
Her TV: 2013 RAM 1500 CC 5.7 Hemi
Her RV: 2010 VCross 20VFB (Camper)
Bill n Diana is offline   Reply With Quote
Old 05-01-2015, 04:42 PM   #18
Senior Member
 
atom ant's Avatar
 
Join Date: Feb 2013
Posts: 7,101
Ken,
I would agree, it sounds like the vent collar - those are not very tight secure connections, and probably not worth pushing your luck. I think the collar is just glued on the tank.


Everything is a trade off on RV design and features for sure.
atom ant is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Redwood RV or any of its affiliates. This is an independent, unofficial site.


All times are GMT +1. The time now is 03:57 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×