Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 12-04-2013, 01:30 PM   #1
Junior Member
 
Join Date: Nov 2013
Posts: 17
Standard Hitch in F350 Short Bed

This is kind of a follow-up to my last thread.

Again, I have a 2011 36RE that I acquired in a private sale. My new 2014 Ford F350 diesel single rear wheel, super crew cab, short-bed, with the 5th-wheel prep package, has arrived at the dealership in New Hampshire.

If it's practical, I woud prefer purchasing a Reese Elite series standard hitch (not a slider) that plays perfectly with the Ford under-bed prep package; instead of adapting the Curt slider that I own.

Basically, the only time I will be towing the RV is back-and-forth to Florida, from New England, during the cold weather months.

I would like to get a concenus from people on the forum on the Reese hitch approach before I commit to buying it. If the standard Reese hitch is practical, is the 18K hitch suitable in my circumstance?

Thanks in advance for the feedback.
I'm new to 5th-wheel RVing; and have only a few years experience with travel trailers.

Don
donwheeler is offline   Reply With Quote
Old 12-04-2013, 02:42 PM   #2
Senior Member
 
Oriana's Avatar
 
Join Date: Dec 2012
Posts: 1,257
Don - we have the Reese Elite 25K, personally I believe the 18K would have been adequate, but our gov't insurance company requires a rating on the hitch to be at least 20% over the trailer's GVWR.

The hitch works really well with the Ford prep package. Installing and removing is easy. No tools required. Suggest you use a padlock on each side to keep the levers in the installed position to prevent possible theft or tampering.

Hitching up is easy and you'll quickly get a feel for positioning the truck and pin height for a trouble free hitching. While unhitching you need to take the load off the pin to pull the release lever. This sometimes takes a little back & forward with the truck. Unhitching at our dealer, on a slight hill, I have had to put the landing gear down to get the fore & aft weight off the pin to release the hitch. To facilitate visually inspecting that everything is secure when hitching up I painted the end of the lever that holds the King Pin when in the closed position.

Can't comment on the pros-cons of slider/short box as we have the 8' box.
__________________

Andy & Judi, Canine Companions Duke & Kona
2012 F350 Lariat CC SRW Airlift 5000 |2013 RW 36FL Winegard Trav'ler
Travel Blog: www.andyandjudi.com
Oriana is offline   Reply With Quote
Old 12-04-2013, 02:51 PM   #3
Senior Member
 
mhs4771's Avatar
 
Join Date: Jan 2012
Posts: 2,807
Don, many get by with a standard hitch and short bed TVs, BUT you will have to be extra careful if you get into any tight situations, especially if on uneven ground. As long as everything is level you're in pretty good shape because of the Front Cap design, but when things are uneven you can have the RV twisting one way while the TV goes the opposite direction greatly increasing the chance for contact. An additional word of caution: Get to a scale and have everything weighed ready to travel. These Redwood are heavy and several members found they needed to trade their new SRW TV for a Dually to handle the pin weight, no problem pulling, just carrying the weight.
Where in Florida do you head? We travel from Western NY to Florida and are in the Sebring area this winter.
__________________
Michelle & Ann
2018 Chevy 3500HD Crew Cab High Country DRW, D/A, 2016 RW39MB, Dual ACs, Auto Level, Auto Sat Dish, Stack W/D, King Sleep #, 17.5" Sailuns w/Disc, MORryde IS & Pin, Comfort Ride Hitch, 5.5 Onan, Res Fridge & Induction Cook Top
mhs4771 is offline   Reply With Quote
Old 12-04-2013, 04:28 PM   #4
Senior Member
 
atom ant's Avatar
 
Join Date: Feb 2013
Posts: 7,101
If you have the trailair triglide pin box on the Redwood (the one with air bag), you definately will be fine without the slider. I had an F350 SB when we bought our redwood, and the slider was the first thing I removed.

If you have the standard trailair pin box, I wouldn't be as sure.

18K should be fine
__________________
Brad & Dory - Lone Tree, CO
CURRENT - 2013 Itasca Meridian 42E/2013 Wrangler 4dr Sahara
SOLD - 2014 Redwood 36RL/2014 F350 DRW
atom ant is offline   Reply With Quote
Old 12-05-2013, 01:48 AM   #5
Junior Member
 
Join Date: Nov 2013
Posts: 17
We stay at "The Great Outdoors" in Titusville, Florida.
donwheeler is offline   Reply With Quote
Old 12-05-2013, 04:08 AM   #6
Site Team
 
Dave&Ginny's Avatar
 
Join Date: Jan 2012
Posts: 5,407
I pulled my RL with a short bed ford without any problems concerning the trailer hitting the truck. I did start out with the standard Pin box.
__________________
SOB "The RV Wiseguy"
Dave&Ginny is offline   Reply With Quote
Old 12-05-2013, 08:22 PM   #7
Senior Member
 
RCAircraft's Avatar
 
Join Date: Oct 2012
Posts: 412
Quote:
Originally Posted by donwheeler View Post
This is kind of a follow-up to my last thread.

Again, I have a 2011 36RE that I acquired in a private sale. My new 2014 Ford F350 diesel single rear wheel, super crew cab, short-bed, with the 5th-wheel prep package, has arrived at the dealership in New Hampshire.

If it's practical, I woud prefer purchasing a Reese Elite series standard hitch (not a slider) that plays perfectly with the Ford under-bed prep package; instead of adapting the Curt slider that I own.

Basically, the only time I will be towing the RV is back-and-forth to Florida, from New England, during the cold weather months.

I would like to get a concenus from people on the forum on the Reese hitch approach before I commit to buying it. If the standard Reese hitch is practical, is the 18K hitch suitable in my circumstance?

Thanks in advance for the feedback.
I'm new to 5th-wheel RVing; and have only a few years experience with travel trailers.

Don
I had the Reese Elite 18K (removable and with slider) installed in my 2012 Ford Lariat 6.7 diesel SWD, four door cab with the short bed. The required under bed steel is impressive and was a reminder about the loads and forces related to towing. I had Ford install the hitch at the time I ordered the truck.
I use a low cost winch that slides into the truck's receiver hitch for removing the hitch. Removal takes about five minutes. I chose the slider for future truck owners as it is not required with my RV due to the nose design on the Redwood. The hitch has been trouble free and easy to operate by myself.
__________________
Bob and Carol - Lees Summit, MO,
2016 Silverado 3500 HD, High Country DRW diesel, 3.73 gear ratio, long bed, 25K Reese Elite removable hitch with 2013 Redwood 36RL with 17.5" H-rated tires and MOR/ryde heavy duty shackle links and bushings; 6.5 KW gen
RCAircraft is offline   Reply With Quote
Old 12-06-2013, 09:58 PM   #8
lwg
Senior Member
 
lwg's Avatar
 
Join Date: Jun 2013
Posts: 918
Another confirmation that a slider is not needed with the short box if you have the trail air pin box. Can't speak to the standard pin box. My biggest problem is the 4x4 truck is so tall I need to raise the pin box up one notch to help level things out, still haven't done that yet but Redwood said it should be ok to do.
__________________
2014 Redwood 38BR, Fulltiming
2013 Ford F-350 CCSB 6.7L 4x4 SRW, B&W Companion Hitch, Air Bags
lwg is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Redwood RV or any of its affiliates. This is an independent, unofficial site.


All times are GMT +1. The time now is 08:18 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×