Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 10-25-2014, 09:44 PM   #21
Senior Member
 
Join Date: Sep 2014
Posts: 119
Hey Ken,
Those pictures are actually in the cabinet above the TV. I don't have any loose cables. I'm not sure really the best way to trace cables. Will I need any special type of equipment?
Jack
__________________

2016 Ram 3500 DRW Laramie Longhorn
2014 RW 38RE
USN Retired
RAMN8TER is offline   Reply With Quote
Old 10-25-2014, 09:55 PM   #22
Senior Member
 
Join Date: Feb 2014
Posts: 545
Exactly right. Perhaps ours aren't wired the same?!! It would seem that you should have three loose coax cables some place if it was prewired for satellite.

I bought a coax tester sometime ago at home depot. I came with a controller with 4 colored coax caps. You put the caps on your coax connectors through out the rig, attach the controller at the input source, press the on button and the controller will light up with the different colors so you can identify the location.

One BIG word of caution using this system.....IT WILL NOT go through splitters! It will only identify straight cable runs.

If you see the orange coax in my picture, the one with a single piece of electric tape, I connected my controller to it and one of the caps on the cable in the hutch slide by the outside TV. That's how I discovered the direct cable run.

I am really surprised that you don't have loose cables somewhere. That should be a part of the satellite prep.

Ken
brenkco is offline   Reply With Quote
Old 10-25-2014, 10:01 PM   #23
Senior Member
 
Join Date: Sep 2014
Posts: 119
Ken,
I hear ya as far as ours not being wired the same!
I'll be going to Home Depot tomorrow a.m. and purchasing one of those cable testers.
Thanks again!
Jack
__________________

2016 Ram 3500 DRW Laramie Longhorn
2014 RW 38RE
USN Retired
RAMN8TER is offline   Reply With Quote
Old 10-25-2014, 10:01 PM   #24
Senior Member
 
Join Date: Feb 2014
Posts: 545
Jack,
Please trace for me the coax from the genie to the splitter. The input from the splitter should be the feed from the roof.

Do you have an HDMI cable from the genie to the TV?
Perhaps we should PM or email so as not to use this thread?

Ken
brenkco is offline   Reply With Quote
Old 10-26-2014, 02:10 AM   #25
Senior Member
 
johnboytoo's Avatar
 
Join Date: Jul 2013
Posts: 2,055
HDMI cables are not required, but just the easiest, best connection type for pic/sound...

I'll go out and takes some pics of our directv setup in the 38gk...
(as soon as LSU stops turning the ball over and beats Ole Miss )
__________________
Ours: '11 Monaco Diplomat 43DFT followed closely by '14 Jeep 4 dr Wrangler.
Hers: '13 Explorer Sport - AWD 365hp twin turbo scooter!
Previous: '13 Ford F350 CC Platinum and '13 38GK
johnboytoo is offline   Reply With Quote
Old 07-09-2019, 10:42 PM   #26
Junior Member
 
Join Date: Jul 2019
Posts: 29
The "cable" tv (living room) is all snowy

We have a 2017 RW 38RE. The "cable" tv (living room) is all snowy but the other 2 tvs are great. all 3 work great on Direct TV and antennae. how do I fix the snowy portion? I cannot find the cable splitter to tighten screwed cable that I suspect is loose. all other cables are tight.
Trailer1234 is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Redwood RV or any of its affiliates. This is an independent, unofficial site.


All times are GMT +1. The time now is 10:03 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×