Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Showing results 1 to 18 of 18
Search took 0.00 seconds.
Search: Posts Made By: bull_chips
Forum: Redwood Care and Feeding 10-17-2015, 03:58 PM
Replies: 33
Views: 5,340
Posted By bull_chips
I have to say, braking is much improved. While...

I have to say, braking is much improved. While testing, I dialed the Ram factory brake controller back from 10 down to 7.5. I often found myself stopping about 50 ft from an intersection and having...
Forum: Redwood Care and Feeding 10-17-2015, 03:56 PM
Replies: 33
Views: 5,340
Posted By bull_chips
Titan Guy also recommended that I move the...

Titan Guy also recommended that I move the brackets for the rubber flex lines out to the frame. This will give the rubber flex lines more slack as the suspension moves. These flex lines will get...
Forum: Redwood Care and Feeding 10-17-2015, 03:39 PM
Replies: 33
Views: 5,340
Posted By bull_chips
I took the 5th wheel out last week to test the...

I took the 5th wheel out last week to test the brakes, as I started pulling out of the driveway, I realized that the brakes weren't working with the brake controller (they worked when the emergency...
Forum: Redwood Care and Feeding 10-07-2015, 10:21 PM
Replies: 33
Views: 5,340
Posted By bull_chips
I wrapped the exposed wiring near the gooseneck...

I wrapped the exposed wiring near the gooseneck with the wire conduit supplied by Titan Guy. I also connected the hot side of the purple wire to a constant hot side of the house batteries. This...
Forum: Redwood Care and Feeding 10-07-2015, 09:21 PM
Replies: 33
Views: 5,340
Posted By bull_chips
Finally the brake line is connected to the 90...

Finally the brake line is connected to the 90 elbow and the reservoir filled. (You can use either fill hole). I then connected the color coded wires, using the butt connectors supplied by Titan Guy....
Forum: Redwood Care and Feeding 10-07-2015, 09:12 PM
Replies: 33
Views: 5,340
Posted By bull_chips
The Brakerite is then mounted to the bracket,...

The Brakerite is then mounted to the bracket, there are four phillips head screws that thread into the bottom of the Brakerite.
Forum: Redwood Care and Feeding 10-07-2015, 09:07 PM
Replies: 33
Views: 5,340
Posted By bull_chips
I received the angle bracket from Titan Guy, as...

I received the angle bracket from Titan Guy, as well as 90 elbow for the Brakerite. After talking to Ron on the phone this morning I proceeded to mount the Brakerite unit. Ron had suggested that I...
Forum: Redwood Care and Feeding 10-07-2015, 01:09 PM
Replies: 33
Views: 5,340
Posted By bull_chips
Yeah, I have the angle bracket needed to mount...

Yeah, I have the angle bracket needed to mount the Brakerite unit. I'll be able to finish it and post the of the project.

Fred
Forum: Redwood Care and Feeding 10-04-2015, 02:38 AM
Replies: 33
Views: 5,340
Posted By bull_chips
I had Crossroads upgrade from the original...

I had Crossroads upgrade from the original Chinese 16" G-rated tires to Goodyear G114 H-rated 17.5" tires. Those are the wheels they came on.
Forum: Redwood Care and Feeding 10-04-2015, 12:28 AM
Replies: 33
Views: 5,340
Posted By bull_chips
Thanks, Ford truck guy, I'm guessing your pretty...

Thanks, Ford truck guy, I'm guessing your pretty happy with your disc brakes. I was surprised when I took the drums off, just how bad the factory brakes were. I knew coming home this year from a...
Forum: Redwood Care and Feeding 10-03-2015, 10:45 PM
Replies: 33
Views: 5,340
Posted By bull_chips
The color coded wires sent from Titan Ron will be...

The color coded wires sent from Titan Ron will be connected inside the junction box, the white wire to white/ground. The black wire to the red-hot wire. The light blue to blue brake line. I...
Forum: Redwood Care and Feeding 10-03-2015, 10:38 PM
Replies: 33
Views: 5,340
Posted By bull_chips
In the kit from Titan Ron are clips and self...

In the kit from Titan Ron are clips and self tapping screws for mounting the brake lines to the bottom of the 5th wheel. All of the lines were installed and the fittings tightened. That's as far as...
Forum: Redwood Care and Feeding 10-03-2015, 10:22 PM
Replies: 33
Views: 5,340
Posted By bull_chips
The brake lines were uncoiled and connected. ...

The brake lines were uncoiled and connected. Four rubber flexlines were connected to the calipers. Then the hard lines were connected to the brass tees. Because of the location selected for the...
Forum: Redwood Care and Feeding 10-03-2015, 09:44 PM
Replies: 33
Views: 5,340
Posted By bull_chips
After the rotors were installed, the calipers...

After the rotors were installed, the calipers were placed on their bracket. Titan Ron suggested that all of the calipers should be mounted in approximately the same position.
Forum: Redwood Care and Feeding 10-03-2015, 09:36 PM
Replies: 33
Views: 5,340
Posted By bull_chips
One thing I did purchase that helped a lot, was...

One thing I did purchase that helped a lot, was an Ingersoll-Rand 20v battery powered 1/2" impact wrench. Very heavy duty, worked great. Next, the bearings were packed and inserted into the new...
Forum: Redwood Care and Feeding 10-03-2015, 09:30 PM
Replies: 33
Views: 5,340
Posted By bull_chips
Two of the brake drums had grease inside from...

Two of the brake drums had grease inside from leaking seals, (less than 10,000 miles). One brake shoe was worn down to the metal and had worn grooves in the drums. Next the backing were removed and...
Forum: Redwood Care and Feeding 10-03-2015, 09:24 PM
Replies: 33
Views: 5,340
Posted By bull_chips
My son-in-law and I were able to get most of it...

My son-in-law and I were able to get most of it installed today. I'm waiting on an L - bracket to mount the Brakerite on. We pulled the wheels off and started removing the drums and old brakes.
Forum: Redwood Care and Feeding 10-03-2015, 09:15 PM
Replies: 33
Views: 5,340
Posted By bull_chips
Titan Disc Brake Install

After reading the threads on here regarding upgrading to disc brakes, I decided to bite the bullet and called Titan Ron, aka Ron Russell. I ordered his install kit along with the Titan controller...
Showing results 1 to 18 of 18

 
Forum Jump
Disclaimer:

This website is not affiliated with or endorsed by Redwood RV or any of its affiliates. This is an independent, unofficial site.


All times are GMT +1. The time now is 05:36 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×