What Did You Do To Your Redwood Today?

[proteus]

Originally Posted by Rick and Mindy

If you go to the Eternabond site I believe it does say that all edges should be caulked, which has always made me wonder why Redwood never did that to the tops of the slides. It is great stuff and almost impossible to remove once placed. The correct way to attempt to remove the tape is with a heat gun.

dealer did this on both ends when i bought camper

now tape on slides needs to be replaced with fresh tape also, adhesive is letting go

heat gun will help old tape release huh?

tape first then dicor around edges of tape

need to order a roll of this tape from amazon and some more leveling sealer too


karl

2012 36RE

[Rick and Mindy]

Originally Posted by proteus

dealer did this on both ends when i bought camper

now tape on slides needs to be replaced with fresh tape also, adhesive is letting go

heat gun will help old tape release huh?

tape first then dicor around edges of tape

need to order a roll of this tape from amazon and some more leveling sealer too


karl

2012 36RE

You can also cover the eternabond tape with eternabond tape. Mine is also coming up at the edges on the tops of the slides and I'm thinking about just covering the ends and up slightly over the top with a new piece. You must be very careful removing the old eternabond with a heat gun because it could stretch the roofing material and then you will have another problem. I think I did find a youtube video showing someone removing the tape.

[proteus]

Originally Posted by Rick and Mindy

You can also cover the eternabond tape with eternabond tape. Mine is also coming up at the edges on the tops of the slides and I'm thinking about just covering the ends and up slightly over the top with a new piece. You must be very careful removing the old eternabond with a heat gun because it could stretch the roofing material and then you will have another problem. I think I did find a youtube video showing someone removing the tape.

Just need some scaffold with walkboards to get up there up

[Colorado]

Shane,
Do you have a part number for the LCI Waste Master storage boxes? I called Lippert and the lady I talked to had no idea about these. Thanks.

[Shane Wood]

Go online and type in wastemaster.com storage boxes. You can purchase them from multiple places. It's to bad Lippert people cannot help you with something they produce

[GTXRAS]

Finally got time to fix the pocket door going into the bedroom. The track pulled through 3 of the screws. This was the second time it was fixed. The service center "fixed" it with 1 screw after the rally. That fix lasted about 2 weeks.
Also got a new dining table while at the service center and they did not install the brackets correctly. When you pulled the pin, the table would not slide out. Remounted the brackets and now it will slide out.
Pulled the plastic pieces out of the right side windows so they will open more.

Rick

[Rick and Mindy]

Originally Posted by Shane Wood

Go online and type in wastemaster.com storage boxes. You can purchase them from multiple places. It's to bad Lippert people cannot help you with something they produce

Shane, I just tried that and all I can find is the sewer hose system, didn't find any boxes. Am I doing something wrong?

[travelin' texans]

Rick, Look up "rv under frame storage " & it's the 1st thing that comes up .

[Shane Wood]

I just looked again and type in wastemaster storage boxes and they pop right up

[Rick and Mindy]

Danny and Shane, what search engine are you using? I'm using MSN and Google and I just tried both of your suggestions and I don't see any individual storage boxes. I do find the double Lci unit with a tire carrier but that is around $500. Do you have a part number? I also tried Lci and only the double system comes up.

[Shane Wood]

Rick
I just go to Google and type in wastemaster storage box. The 1st item showing is the waste master system and then the single boxes. Maybe you have one of them new fangled I Phones and it's causing you problems

[r time soon]

Here you go:

Let me google that for you

Chris

[ted 95]

Originally Posted by Rick and Mindy

Danny and Shane, what search engine are you using? I'm using MSN and Google and I just tried both of your suggestions and I don't see any individual storage boxes. I do find the double Lci unit with a tire carrier but that is around $500. Do you have a part number? I also tried Lci and only the double system comes up.

Hi Rick
Go to drainmaster.com they make the drain system and boxes for lippert. you can call Sharyl 877-787-8833.They are on western time. Really nice people. Will also work with you with pricing as when I pointed out their difference with Lippert they gave me a discount. Also if you want a hose a special length they will do it for you. Her email is sharyl@drainmaster.com

[Bogey3025]

Thanks for sharing the information for drainmaster.com. Purchased our storage box today and they gave us 10% off. Many thanks!!

[RomanyLife]

Wow... I'm very happy. Today we got rid of those cheap, flimsy floor registers in our 38RL and replaced them with new, solid brass ones from Signature Hardware!! Love them! Yes, they are a bit expensive; $31.00 a piece, but well worth it for me. They have other styles and material, not all in the 4x8 size we needed, but plenty to choose from.

Victorian Brass Floor Register - Registers - Hardware

20161220_144001.jpg

Both.jpg

bedroom.jpg

20161220_143940.jpg

[830hvacman]

Looks awesome!!!!

[Dale & Tracey Fietz]

Looks great.We were thinking of changing ours.You made our minds up for us.

[Coco]

sorry can not find the Post you sent me

[shrode]

Love the looks. Thanks for the link. I'll definitely check them out. I just hate the appearance of the Redwood stock covers.

[Ford truck guy]

I will be swapping ours out soon , and they are fantastic looking ! Thanks for the tip , and link !

Joe