Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-16-2014, 04:14 PM   #21
Senior Member
 
0nTheRoad's Avatar
 
Join Date: Feb 2013
Posts: 1,092
Quote:
Originally Posted by Dave&Ginny View Post
The button is very small and has to be pushed in with a key or small knife. Most of my slide problems have been resolved by spraying the silicone spray on the tracks and resynchronizing the motors by running them either in or out and holding the button for a few seconds after the slide stops moving.

The sevice center taughts me to run the slides in all the way.... then out just a few inches....then back in. After doing this a few times, the system was as good as new.
Same for us, after spraying the tracks with the teflon lubricant and running the slide in/out a couple of times...problem is gone!!!
__________________
SOB
0nTheRoad is offline   Reply With Quote
Old 07-16-2014, 08:36 PM   #22
Senior Member
 
Grandpa's Avatar
 
Join Date: Nov 2011
Posts: 304
After further investigation I find that both upper corners of the slide are closing correctly along with the lower right corner. There is a 3-4inch gap in the lower left corner. It almost looks like the mechanism has skipped a few teeth on that bar. Can that happen?
I recently added the 'H' bar in that same corner due to a small crack that several other RL owners have experienced. Is that repair related to the slide not closing properly?
__________________
Grandpa is offline   Reply With Quote
Old 07-16-2014, 08:46 PM   #23
Site Team
 
Dave&Ginny's Avatar
 
Join Date: Jan 2012
Posts: 5,407
Quote:
Originally Posted by Grandpa View Post
After further investigation I find that both upper corners of the slide are closing correctly along with the lower right corner. There is a 3-4inch gap in the lower left corner. It almost looks like the mechanism has skipped a few teeth on that bar. Can that happen?
I recently added the 'H' bar in that same corner due to a small crack that several other RL owners have experienced. Is that repair related to the slide not closing properly?

I don't think the cracks are related to the slide. I don't know about skipping teeth but I think I would run it in and out several time and see if it corrects itself.
__________________
SOB "The RV Wiseguy"
Dave&Ginny is offline   Reply With Quote
Old 07-16-2014, 10:54 PM   #24
Senior Member
 
JohnEileen's Avatar
 
Join Date: May 2014
Posts: 326
Our slides have been working, but I would like to know why we are gettin wood shavings that look like saw dust every time we take them in and out! I find it in the area by the refrigerator and by the bedroom slide near the bathroom.
__________________
John & Eileen
2013 Redwood 36RL 2013 Ford 350 Diesel Lariat
Pittsboro, IN
JohnEileen is offline   Reply With Quote
Old 07-16-2014, 11:21 PM   #25
Senior Member
 
DLRAKOWITZ's Avatar
 
Join Date: Jun 2014
Posts: 392
I was wondering the same thing. Mine has been doing that several times now but I can't find out were specificly it is coming from
__________________
David and Beth with our sidekick red heeler Queso the "big cheese". 2016 38GK with double unagaurd awnings with led lights and trailair air tri-glide pin box 8K axles with Linc System. 2012 Ram 3500 4x4 crew cab Laramie LWB Edge Juice with attitude with B&W 20k companion hitch.
DLRAKOWITZ is offline   Reply With Quote
Old 07-17-2014, 12:55 AM   #26
Senior Member
 
travelin' texans's Avatar
 
Join Date: Sep 2012
Posts: 3,353
Run your slide out about 2-3" & back in(continue holding switch for several seconds), do this 3-5 times & should square it up, worked for me.
As for the sawdust, there was apparently no clean up during construction, sawdust,cutouts, screws, wire pieces can be found in every nook & cranny you open up, if you don't clean it up it will eventually quit falling out.
__________________
Danny & Linda
Full-timed 10+ years
Former '13 FB owner
Traded '13 GMC Denali DRW D/A
Currently rv & truckless
Replacement undetermined
travelin' texans is offline   Reply With Quote
Old 07-17-2014, 01:20 AM   #27
Senior Member
 
atom ant's Avatar
 
Join Date: Feb 2013
Posts: 7,101
I get the sawdust - it blows in from the return air vents while traveling. I took down the basement wall and got in there with a vacuum and just about got it all gone now.
__________________
Brad & Dory - Lone Tree, CO
CURRENT - 2013 Itasca Meridian 42E/2013 Wrangler 4dr Sahara
SOLD - 2014 Redwood 36RL/2014 F350 DRW
atom ant is offline   Reply With Quote
Old 07-17-2014, 01:26 AM   #28
Senior Member
 
JohnEileen's Avatar
 
Join Date: May 2014
Posts: 326
Thank you! I was worried that something was rubbing and wearing down the wood on the slide as they went in and out.
__________________
John & Eileen
2013 Redwood 36RL 2013 Ford 350 Diesel Lariat
Pittsboro, IN
JohnEileen is offline   Reply With Quote
Old 07-21-2014, 09:17 PM   #29
Senior Member
 
Grandpa's Avatar
 
Join Date: Nov 2011
Posts: 304
Thanks to all for the feedback! I've tried everything that you've suggested but the lower right corner is still not closing correctly. Looks like a trip to the local RV expert is in order. It's quite a coincidence that the problem is in the same corner that the 'H' clip was just installed a few weeks ago. Is anyone familiar with that process? Do they have to derail the slide to do that work?
__________________
Grandpa is offline   Reply With Quote
Old 07-22-2014, 04:43 AM   #30
Senior Member
 
sinder's Avatar
 
Join Date: Jan 2012
Posts: 506
It does sound like something is holding up the one corner. I'm not familiar with the H clip install. Here is the alignment video from Lippert just in case you need it.

http://video.search.yahoo.com/video/...4j&age=0&&tt=b
__________________
Dean & Pam - SOB
sinder is offline   Reply With Quote
Old 07-22-2014, 03:46 PM   #31
Senior Member
 
JohnEileen's Avatar
 
Join Date: May 2014
Posts: 326
Thank you so much. We are ordering the part and a mechanic will come to the campground to install it. It means we won't leave today as planned, but at least we don't have to be back for work this week.
__________________
John & Eileen
2013 Redwood 36RL 2013 Ford 350 Diesel Lariat
Pittsboro, IN
JohnEileen is offline   Reply With Quote
Old 07-22-2014, 03:47 PM   #32
Senior Member
 
JohnEileen's Avatar
 
Join Date: May 2014
Posts: 326
Sorry I posted the above to the wrong thread.
__________________
John & Eileen
2013 Redwood 36RL 2013 Ford 350 Diesel Lariat
Pittsboro, IN
JohnEileen is offline   Reply With Quote
Old 07-22-2014, 07:36 PM   #33
Senior Member
 
atom ant's Avatar
 
Join Date: Feb 2013
Posts: 7,101
I do that all the time and not sure how I do it
__________________
Brad & Dory - Lone Tree, CO
CURRENT - 2013 Itasca Meridian 42E/2013 Wrangler 4dr Sahara
SOLD - 2014 Redwood 36RL/2014 F350 DRW
atom ant is offline   Reply With Quote
Old 08-04-2014, 03:27 PM   #34
Senior Member
 
Grandpa's Avatar
 
Join Date: Nov 2011
Posts: 304
Quote:
Originally Posted by Grandpa View Post
Thanks to all for the feedback! I've tried everything that you've suggested but the lower left corner is still not closing correctly. Looks like a trip to the local RV expert is in order. It's quite a coincidence that the problem is in the same corner that the 'H' clip was just installed a few weeks ago. Is anyone familiar with that process? Do they have to derail the slide to do that work?
Update on the slide issue... the RV Service Manager at the local shop says the gears on the problem corner have been "chewed up" and must be replaced. They suggest I replace both motors and frame for the slide out to insure we don't have to do it again in the near future. He is not a Crossroads dealer so I have to order the parts from Tiara RV and he will do the installation. He didn't have anything nice to say about Lippert and stated that they see this problem with all of the RV brands they work with. Has anyone else on the forum faced this problem? Could there be an alternate slide mechanism that will be more dependable?
I also need a part number for the full 36RL slide assembly. I can't see the motors well enough to get a number. Where would I find that information?
__________________
Grandpa is offline   Reply With Quote
Old 08-04-2014, 04:33 PM   #35
Senior Member
 
atom ant's Avatar
 
Join Date: Feb 2013
Posts: 7,101
That would be one heck of a conversion to try to change it over to cables or hydraulic.

Lippert should be able to provide you part numbers for all of it, or even Redwood, even if you are not buying through them.
__________________
Brad & Dory - Lone Tree, CO
CURRENT - 2013 Itasca Meridian 42E/2013 Wrangler 4dr Sahara
SOLD - 2014 Redwood 36RL/2014 F350 DRW
atom ant is offline   Reply With Quote
Old 08-04-2014, 04:54 PM   #36
Site Team
 
Dave&Ginny's Avatar
 
Join Date: Jan 2012
Posts: 5,407
I was just test driving a new Tiffin Phaeton and was surprised to see that on their small slide they use same type of system that Redwood uses. He said they only use that on their SMALL slide and they haven't had any problems at all.
__________________
SOB "The RV Wiseguy"
Dave&Ginny is offline   Reply With Quote
Old 08-04-2014, 07:27 PM   #37
Senior Member
 
Rick and Mindy's Avatar
 
Join Date: Feb 2013
Posts: 1,444
I'm not sure what kind of system Excel uses but I don't see any cables or shwintek. I know that my 2004 Hitchiker had an electric bedroom slide but I remember looking underneath the bed and there was a fake floor, when you unscrewed the fake floor there was a gear system and an electric motor that operated the slide. Never a problem with it in 9 years and if there had been a problem everything was easy to get to. The rest of the slides were hydraulic. with never a problem. That's one reason I wanted to stick with hydraulic slides when I replaced it .
__________________
Rick and Mindy
Retired
2013 Redwood 31SL, 2011 Ford F350 SRW, 6.7, Crew Cab with Firestone Bags, Titan Disc Brakes
Rick and Mindy is offline   Reply With Quote
Old 10-18-2015, 03:21 PM   #38
Senior Member
 
Join Date: Feb 2014
Posts: 219
Okay I need some help I have want I think is a slightly different issues. I had the bedroom slide floor replace at the Dealership and when I brought it home the slide ran out perfectly, but now I need to report to new job assignment and I cannot get the slide to come in.


It will come in about two to three inches and stops, it will go back out, but not in. Please help.
__________________
2013 Redwood RE
2013 GMC 2500 Duramax 6.6 Turbo Z71
arcticman1957 is offline   Reply With Quote
Old 10-18-2015, 04:27 PM   #39
Senior Member
 
Join Date: Feb 2015
Posts: 767
Did you try using the CRC Lube with Teflon on the slide rails? This is a common issue that the slide rails need lubed at least every 2-4 months. I just do ours a couple days before we are to leave and have not had the issue in a long time
__________________
2020 Newmar Baystar
RWJSIM2003 is offline   Reply With Quote
Old 10-18-2015, 08:22 PM   #40
Senior Member
 
Rick and Mindy's Avatar
 
Join Date: Feb 2013
Posts: 1,444
Quote:
Originally Posted by arcticman1957 View Post
Okay I need some help I have want I think is a slightly different issues. I had the bedroom slide floor replace at the Dealership and when I brought it home the slide ran out perfectly, but now I need to report to new job assignment and I cannot get the slide to come in.


It will come in about two to three inches and stops, it will go back out, but not in. Please help.
Number 1: Make sure there is nothing in the way of the slide, stopping it from going all the way in. Number 2. If I remember right, every time you use the switch to open or close the slide you need to hold the switch in for an additional 3-5 seconds. This synchronizes the motors. You may have to try that several times. Also, already mentioned, the slide rails need to be lubed. You can also go to LCi website and they should have instructions on how to reset the shwintek system.
__________________
Rick and Mindy
Retired
2013 Redwood 31SL, 2011 Ford F350 SRW, 6.7, Crew Cab with Firestone Bags, Titan Disc Brakes
Rick and Mindy is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Redwood RV or any of its affiliates. This is an independent, unofficial site.


All times are GMT +1. The time now is 07:10 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×